The main function of the T33 filter element is to improve the taste of water, if the filtered water has a smell of chlorine, that is, T33 should be replaced; T33 filter element should pay attention to a problem, T33 filter element has two interfaces, one is quick plug-in, one is a threaded port, pay attention when buying, otherwise it will not be installed.

Problems that should be paid attention to when replacing the T33 filter element:

1. Check the length of the filter element: compare the length of the old and new filter elements, if the length of the new filter element is insufficient, you can add rubber pads to solve the problem. Specific operation: The rubber pad can be removed from the old filter.

2. When placing the filter element, pay attention to putting the filter element right, especially PP is easy to deviate, when screwing the filter bottle, you should feel it by hand, do not screw it hard when it can't be screwed, and unscrew the filter bottle to put the filter back in place, so as not to damage the filter element. The granular activated carbon has a rubber pad with the end facing up, and the small T33 is marked with the direction of water flow.

3. After the installation of the filter element, it can be flushed before it can be connected to the system of the rear stage, disconnect the pipeline connecting the lower stage when flushing, and the RO stage can be flushed with power, and the ultrafiltration water purifier only needs to open the water inlet ball valve to flush, and the flushing time is not less than 5 minutes, and it is connected to the lower treatment system after the flushing is completed.

4. The use time of the filter element depends on the water quality, generally 6-8 months, and PP can be cleaned and used. Do not exceed 1 year.