Water dispensers can be seen everywhere in people's daily life, at home, in companies, and even in public places, you can see the figure of water dispensers, it brings great convenience to people's lives, but relatively speaking, the cleaning of water dispensers has become a more troublesome problem, many friends are asking how to clean the water dispenser filter, in fact, there is a certain method, let's go to HE activated carbon filter manufacturers to learn about it.

How often should the water dispenser filter be cleaned

Water dispensers have their own filters, which also have a certain sterilization effect, but after a long time, a lot of dirt will accumulate, so we must clean the water dispenser filter element regularly, and if necessary, we will replace the filter element. Under normal circumstances, we should clean the water dispenser filter element once every 1-2 months, and it is better not to exceed half a year, so as to ensure the cleanliness of the water dispenser filter element and ensure that the water is assured. Another point is that if you have not used the water dispenser at home for a long time, then you must completely clean the water dispenser before using it again, especially the filter element, and ensure its cleanliness.

Cleaning method of water dispenser filter element

Method 1:

1. First of all, the water dispenser filter element should be removed, and then the upper and lower sections of the filter element should be separated, and then the filter element should be rinsed with clean tap water, and if the filter element is very dirty, you can also use a brush to gently scrub the surface of the filter element.

2. Fill about half a pot of water on the upper part of the filter element, then shake the filter element up and down, pour out the remaining water after several times, and then repeat this process to know that the micropores of the filter element are unobstructed.

3. Then fill the lower part of the filter with tap water, and use your palm to shoot flat, so that the filter element will shake, repeat this action until clean water flows out of the filter element.

Method 2:

1. Remove the filter element of the water dispenser, then rinse it with high-pressure tap water, brush it lightly, and soak it in the bleaching powder volume for about an hour, then clean it again.

2. The cleaning method for the activated carbon in the filter element is to pour out the activated carbon, then scrub it with water, and then put it back in.

3. If it is granular activated carbon, then it needs to be soaked in dilute hydrochloric acid for four hours, and then cleaned, so as to restore its activity.

Method 3 (Ceramic Filter):

1. Take out the ceramic filter element.

2. Put the ceramic filter element into clean water, put it horizontally, and then shake it up and down to clean. Soak for about 5 minutes, then take out the main filter element, and then place it upside down until there is no water flowing out of the main filter element, and then place it upright, put the main filter element in a bucket of clean water, gently shake it up and down to rinse, take out the main filter element after about 3 minutes, and then repeat the above steps three times.

3. Then align the bottom of the main filter with the tap and rinse it directly until there is no black water in the main filter.

4. Replace the ceramic filter cartridge on top of the water dispenser.

Summary: The cleaning of the filter element of the water dispenser is very important, and it must be cleaned regularly, otherwise a lot of dirt will accumulate on the filter element, which will be affected by drinking the water that has passed through it